Key Specifications/Special Features:
APV solar charger is a combination of AP inverter and solar charger. The APV pure sine wave inverter not only makes your solar system simple in wiring, but also has all the unique features from the inverter and solar charger.
? APV pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W (3s sensing cycle)/3W (30s sensing cycle) *. It can extract max. power from various batteries with different protections.
? High overload ability of our APV charger is up to 300% rated power (20 sec.), and low voltage trip 9.5V/10V or 10V/10.5V is selectable.
? Our APV solar charger can achieve reverse current protection and battery temperature compensation, with the high efficiency MPPT function (97%). Auto input DC voltage can be detected between 12V/24V.
? Our APV pure sine wave inverter supports 3-step intelligent battery charging, and equips with 8 preset battery type selector for totally flat batteries. Its powerful charge rate up to 90Amp. In addition, PFC (power factor correction) is adopted for charger, which has less power
consumption than conventional units.
? LCD status display, USB communication port, battery/AC priority switch are available for our APV pure sine wave inverter, it also has 17 alarms/warnings for easier operation and troubleshooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode
can be used too.
? The APV solar charger has 15s delay before transfer when AC resumes, and the function of overload protection when it equips with generator. Also, it allows start up and through power with depleted batteries.
? 10ms typical transfer time between battery and AC, which guarantees power continuity of APV pure sine wave inverter. Its input AC voltage is selectable (184-253V or 154-253V) for different kinds of loads.
Primary Competitive Advantages:
Small Orders Accepted
Country of Origin